PRINTER DRIVERS FOR THE
OLDER PRODUCT LINE

DA590/600/606/607/608/610/615, PS1000/2000, XPS1000/2000/3000,
Envelope Imager I (DA612), Envelope Imager II (DA613), *Envelope Imager 2XP (DA616)

Rena Models:
DA590/600/606/607/608/610/615, PS1000/2000, XPS1000/2000/3000,
Envelope Imager I (DA612), Envelope Imager II (DA613), *Envelope Imager 2XP (DA616), Imager III

Installation Instructions:

• After your purchase has been completed you will recieve an email with a user names and password to access your file for download.

• When prompted to open or save, choose SAVE.

• After the file has been downloaded to your system, select OPEN or RUN the file.
  The Driver Installation Wizard will open to walk you through the process of loading the appropriate printer driver to your system.

CLICK HERE TO ORDER THE RENA PRINTER DRIVER CD
(For users who do not own a licensed printer driver CD.)
NOTE: If you do not own a licensed printer driver CD for your
Rena printer, you can order the drivers on CD.
Please order part number FM3-00-CDR from your local Rena dealer
or purchase the CD now from our secure online shopping system.
This CD contains Rena printer drivers for Windows 95/98/ME/NT4/2000/XP
and a trial version of FlexMail. Excludes Rena dot-matrix printers (DA3xx).

Note to FlexMail users:
Please be sure to load the correct driver version!
- Printer drivers V3.53 or lower are for use with FlexMail 2.
- Printer drivers V4.04 or higher are for use with FlexMail 3 SP7 or higher.
If you are using a lower version of FlexMail 3; please update the program.
- When using the Envelope Imager III with FlexMail; please be sure to load and
use the driver developed by FlexSystems (("Envelope Imager III (Flex)" driver)).

Note to JetMate 3 and JetMate III Users:
These drivers will not work with JetMate 3 or JetMate 3 for the Imager III.
- When using JetMate 3 you must load the HP DeskJet 500 and
LaserJet III drivers from you Windows Operating System CD.
- When using JetMate 3 for the Imager III you must load the drivers
(Rena Imager III; standard and overlay drivers) found on the
JetMate3 CD.

Note to Windows NT/2000/XP Users of the DA606/607:
Drivers for these newer operating systems are currently available, however, since these models were developed many years before these operating systems were available, performance will be affected by the use of these newer operating systems.

For Example: When printing True Type fonts from these newer operating systems to a DA606/607 model, you will notice that it takes multiple head movements to print each line. This in turn will greatly reduce your throughput. This symptom is due to the way data is sent from these newer operating systems to these older "line printers". Unlike Windows 95/98, where each line is preceded with a single positioning command; in Windows NT/2000/XP each word, in the line is preceded by a new positioning command. These multiple positioning commands cause the printer to make multiple head (cartridge) movements.

Because of this limitation, we recommend using the DA606/607 printer models from a Windows 95/98 platform if you plan to print True Type Fonts.

The above results assume your printer contains the latest versions of EPROMs (internal printer firmware). If the EPROM versions within your printer, are early versions, you may experience "garbage printing" or "stair stepped" lines, when attempting to print True Type fonts.

To avoid these problems, when using a DA606/607 printer driver on a Windows NT/2000/XP platform, it is strongly suggested that you only choose and print "internal printer fonts". An internal printer font is a font, which is identical in name and point size to a font available within the printer. Examples: Cour12, TmsRm12, Helv10.